Updated November 2026
Choosing a solar hot water heater element comes down to four things: the voltage your panels or battery bank produce, the wattage you need for reasonable heat-up times, the thread or flange size that fits your tank, and the sheath material that will hold up to your water chemistry. The picks below are DC immersion and screw-in elements sold on Amazon US, compared on those criteria.
Our top picks at a glance
- 1
TOP CHOICEBest overall12v/24v/36v/48v Heating Element Immersion Tubular Water Heater DN25 dcView on Amazon - 2
TOP CHOICEBest for low-voltage small tanksDERNORD 12V 150W Immersion Heater Submersible Water Heater Element StaView on Amazon - 3
TOP CHOICEBest for slightly faster heating at 12VDERNORD 12V 200W Immersion Heater Submersible Water Heater Element StaView on Amazon - 4
Best for higher-voltage battery banksDERNORD 48V 1500W Submersible Water Heater Element Immersion Heating ElementView on Amazon - 5
Best for standard AC backup tanksCamco 2000W/120V Screw-In Water Heater ElementView on Amazon
Our Top Picks
| Product | Best for | Key feature |
|---|---|---|
| 12v/24v/36v/48v Heating Element Immersion Tubular Water Heater DN25 | Multi-voltage solar DC setups | Runs on 12 to 48 volts |
| DERNORD 12V 150W Immersion Heater | Small 12V tanks | 1 inch NPSM flange |
| DERNORD 12V 200W Immersion Heater Double U Type | Faster 12V heat-up | Double U stainless sheath |
| DERNORD 48V 1500W Submersible Water Heater Element | High-wattage 48V banks | 1500W at 48V |
| Camco 2000W/120V Screw-In Water Heater Element | AC backup on standard tanks | 1-1/2 inch NPSM bushing |
12v/24v/36v/48v Heating Element Immersion Tubular Water Heater DN25 dc Solar Water Heating Element (12v 300w)
12v/24v/36v/48v Heating Element Immersion Tubular Water Heater DN25 dc Solar Water Heating Element (12v 300w)
Best for: Multi-voltage solar DC setups
This suits builders who want one element that can move between a 12V, 24V, or 48V system as their array changes. Listings describe it as a DN25 threaded tubular element for solar water heating.
Pros
- Listed for several DC voltage levels
- DN25 thread format for common tank ports
Cons
- Output varies with the voltage you actually feed it
DERNORD 12V 150W Immersion Heater Submersible Water Heater Element Stainless Steel Heating Element with 1 Inch NPSM Flange
DERNORD 12V 150W Immersion Heater Submersible Water Heater Element Stainless Steel Heating Element with 1 Inch NPSM Flange
Best for: Small 12V tanks
A good fit for compact DC tanks or a small DIY batch heater where a modest 150W load is enough. The 1 inch NPSM flange is the main fit consideration. If you want more background, see 5 Best Solar Water Heater Elements of 2026: Buyer's Guide.
Pros
- Low wattage keeps 12V draw manageable
- Stainless steel sheath
Cons
- Slow heat-up on larger volumes
DERNORD 12V 200W Immersion Heater Submersible Water Heater Element Stainless Steel Heating Element with 1 Inch NPSM Fitting Double U Type
DERNORD 12V 200W Immersion Heater Submersible Water Heater Element Stainless Steel Heating Element with 1 Inch NPSM Fitting Double U Type
Best for: Faster 12V heat-up
Builders who want more output from a 12V system without moving to a higher voltage will find this a logical step up from the 150W version. The double U design is intended to increase contact with the water.
Pros
- 200W at 12V gives quicker heating than 150W
- Same 1 inch NPSM fitting as the 150W model
Cons
- Draws more current from a small battery bank
DERNORD 48V 1500W Submersible Water Heater Element Immersion Heating Element
Best for: High-wattage 48V banks
This is for systems with a 48V battery or array that can supply sustained high current. It heats far faster than the 12V options, but the wiring, fusing, and controller need to match its draw.
Pros
- 1500W output shortens heat-up times considerably
- Suited to larger storage volumes
Cons
- Requires a 48V system and heavier cabling
Camco 2000W/120V Screw-In Water Heater Element
Camco 2000W/120V Screw-In Water Heater Element | Features a High Watt Density Design, a 1-11 ½-inch NPSM Steel Bushing, and is Compatible with Most Water Heaters (02203)
Best for: AC backup on standard tanks
Not a DC solar element, but a common screw-in replacement for standard 120V tanks used as a backup heat source on solar installations. Owners often report it is a direct swap for many conventional water heaters.
Pros
- Screw-in fit for standard tank ports
- High watt density for rapid backup heating
Cons
- Runs on grid AC, so it adds to your electric bill
Buying Guide
Match the voltage to your power source
DC elements are rated for specific voltages, and running one at a voltage it was not built for can cause overheating or early failure. Check the label against your panel or battery bank before buying.
Check the thread or flange size
Most tank ports use 1 inch or 1-1/2 inch NPSM threads, and the element must seat with the correct gasket. Measure the existing port before ordering.
Weigh wattage against heat-up time
Higher wattage heats water faster but draws more current. A 12V system often cannot sustain the draw of a high-wattage element without additional battery capacity.
Related reading
- Top 5 Solar Hot Water Heater Evacuated Tube Collector Options Compared
- Solar Water Heater Temperature Problems: Too Cold or Too Hot
- Solar Water Heater Rainy Days: How to Keep Hot Water Flowing
- Solar Water Heater No Hot Water: 7 Causes and Fixes Walkthrough
- Solar Water Heater Electric Coil: How to Add a Backup Heating Element
