The Best Way To Install A Ceiling Fan Pretty Much All By Yourself

Do you have room that could use a ceiling fan? Setting up a ceiling fan yourself is relatively easy, if you are purely replacing a light fixture that is already in the appropriate location. All of the cabling will already be around, so the only challenge will be replacing the existing work box with one that is authorized for the weight of a ceiling fan. If you dont change the present work box to something that can cope with the weight could spell disaster. Right before you carry out anything, read the manuals for your fan very thoroughly and make sure that you have the necessary tools.

If you’re going to put in the fan over a cathedral type ceiling, then you may need to have parts to prolong the fan lower. Whenever you have everything all set, the foremost thing you ought to do is make sure that the breaker is turned off so no power goes to the light fixture. After taking off the current light fixture, check to see if the installed work box can manage the weight of your ceiling fan. Usually they aren’t made for a ceiling fan, so you will need to include more support. Including support to the work box is not that difficult if you have entry to the light fixture from the attic. Look at this great interior design website.

All you want to do, is nail a 2×4 within the ceiling rafters, so it touches the top of the work box. Ensure the 2×4 is attached in its place, and then attach the box to the wood. If you do it properly, the fan should be properly supported by the 2×4. If you don’t have access to the attic, you may have to mount metal cross bracing via the hole in your ceiling. This is harder to do, and most likely not as protected in the end, but definitely will have to do with no attic entry.

So now, after assembling the fan as stated by the instructions, you are ready to put any fan. The difficult part is keeping the fan, while hooking up the wiring. It depends upon the type of fan you have, many come with a bracket with a J hook while others have a hanging frame. Majority of fans require a chain to master the speed of the fan and the wall switch turns the unit on or off. If you prefer a light kit along with your fan, they can be controlled by either chain or wall switch. Take a look at this website for a lot of great discount lighting evaluations.

After that, just follow the wiring directions, usually as easy as connecting the two black wires, both white wires, and the two ground wires. Once you have accomplished putting together the fan and cabling, the last step is to attach the fan blades. Once this is all done, it is time to flip the breaker back on to see if it functions.

Posted under Solar Water Heaters

This post was written by editor on July 26, 2011

Tags: , , , ,

Leave a Comment

Name (required)

Email (required)

Website

Comments

More Blog Post