How To Make A Wind Turbine System At Home

For most people it is less costly to learn how to make a wind turbine at home than it’s to purchasing an already-built wind power system. An already made wind power system can cost you thousands, but if you make a homemade wind turbine you won’t need to invest much at all. Click the link that will be following to learn how to make a wind generator at home for less than 200 dollars.

Once you’re completed reading through this short article you will know how to make a wind generator at home with no problem finding parts that you could find at your local hardware store or even at a scrap yard, and the best part is that they are low-cost. No matter where you find the parts to make your homemade wind energy system you will not have to invest thousands of dollars to make wind turbines which will generate electrical power for your house.

The Propeller Rotor blades

One of the most typical materials that you can use to create your blades are PVC piping. To create the wind turbine blades with PVC you have to locate a PVC pipe that’s about 8″ to 12″ in size. Once you’ve found one with those aspect divide it into 4 equivalent parts perpendicular. To create a six foot rotation diameter you need to possess a pvc pipe that’s about three feet long.

The Generator

When you are looking for the generator you will not have to find a heavy duty kind. Just be sure you go with a generator that has a very low RPM rating. The reason why you want a very low RPM rating is that you can have low blowing wind speeds and your wind mill will still be able to produce a nice quantity of voltage. Click the link that will be following to learn how to make a homemade wind turbine for less than 200 dollars.

The Batteries

The batteries that you decide on don’t have to be the biggest ones either. The best kind of electric battery that you could get is a forklift one. So to get a forklift battery you can ask around a number of you local hardware stores and see if they have and old or extra ones that you can have.

The Tower

The tower has to be sturdy for this to operate properly, and the best material that you could use is, conduit pipes. You will have to connect about 6-10 feet long of conduit pipes using T-joints, which will make it strong enough for your wind generator.

So you can tell that you can make a homemade wind power system from components that you can find at a scrap yard or for cheap at a local hardware shop. So from just this simple diy wind energy system there’s no wonder why more and more individuals are creating their very own wind generator at home to generate electrical power which will lower their electricity bill. Click the link that will be following to learn how to make a wind generator at home for less than 200 dollars.

Posted under Renewable Energy

Leave a Comment

Name (required)

Email (required)

Website

Comments

More Blog Post

    All you need to know for a DIY Soalr System in Books and CDs on eBay

1978 Mother Earth News Magazine Number 51: Solar Water Heater

Solar Power Cooker cd 38 bks Water Heater Homesteading Pump Dryer Vol. 1 of 4

Solar Power Cooker CD ROM 38 Books Water Heater Homestead Pump Dryer Vol. 1 of 4

Detailed Guide on Making Solar Water Heaters: Making Cheap but Quality PVC Solar Water Heaters

As Advertised on eBay